Please read through COTX FlexiMining Terms of Service and agree the terms before you take any action.

Notes: NEVER forget your 12 words when you setup your e-wallet for your $Crypto! No one can recover it for you!


a

FlexiMining - Mysterium


Please read through Mysterium-Term of Service and agree the terms before you take any action.


About Mysterium

https://www.mysterium.network/


Prerequisites for run Mysterium in your COTX Hotspot

a.  X3 firmware,  1.2.12   

b.  Your X3 has public IP, fixed or unfixed  

c.  Stable broadband, unlimited capacity and time;  

d.  The customer takes the full responsibility to use and provide VPN service in your country/region; (VPN has been banned in some countries)  

e.  EVERY Public IP, there can only be one X3 be installed Mysterium Node (Mysterium's requirement)

f.  Agree on the COTX FlexiMining Terms of Service.

g. Agree on the Mysterium Terms of Service.



Enable FlexiMining Mysterium

Login to your COTX IOT Cloud:  COTX Hotspot Cloud Service , enter your walletspace, click the arrow into your Hotspot dashboard; or click "Hotspot" menu in the left menu directly enter your Hotspot dashboard;

Click the shopping cart icon right next to the MYST, to trigger the payment to enable the FlexiMining app.

You may check your order in this shopping cart, FlexiMining Service Fee would be charged every 3 Months.


Now you enter checkout page, you may apply your discount code here, if you have one.

Provide your credit card payment information, so the system would record your payment information, then charge you 3 months later. And you must press "Subscribe now" to active your FlexiMining subscription.



Payment done, you will see the confirmation page, it tells you this is a recurring payment, and you would be charged every 3 months.

Close this payment page, it may take 1-2 mins to reflect the payment results back to the COTX Hotspot Cloud Service.

Before your payment results back to the COTX Hotspot Cloud Service, your order status is "To be paid", then after a while, if you refresh the page, you would see "payment Successful":




Back to Hotspot Tab, MYST status is ready to be installed:

Click MYST, to start install the Mysterium Node into your COTX Hotspot.

Click the INSTALL to start the installation process.


Installing....







CLICK MYSY, redirect to Mysterium cloud portal: https://mystnodes.com/


Now if you manually open a web browser, [input your hotspot IP address]:4449, then you can open MYST node UI, start to setup your WYST node:    e.g 192.168.1.113:4449

Then, follow Mysterium's instruction finish MYST node installation.


Mysterium Reference

Mysterium Crypto Wallet Requirement

Make sure withdrawal address is from ERC-20 Polygon compatible wallet (e.g. MetaMask or MyEtherWallet)! Check HERE for instructions how to setup MYST token on MetaMask


https://docs.mysterium.network/

https://www.mysterium.network/faq


Mysterium Cloud Portal

https://mystnodes.com/nodes



FlexiMining - Computecoin - CCN


Please read through COTX FlexiMining Terms of Service and agree the terms before you take any action.


About Computecoin - CCN

What is Computecoin?
Computecoin (CCN) is the next-generation infrastructure that powers all-purpose Web3 and metaverse services.

Computecoin makes it easy for you to get started in all things Web3: AI, VR, AR, dApps, NFTs, and more by providing rich, low-cost, low-latency, and trustworthy computing and storage power for Web.3 pioneers. Plus, our secure and decentralized network ensures that your data is always safe.

COTX and CCN

COTX has been working with computecoin to let COTX FlexiMining support CCN mining app on top of COTX X3. Now we welcome customers to join our FlexiMining - CCN beta test.

Prerequisites for run CCN in your COTX Hotspot

a. Your COTX X3 version upgraded to firmware v1.2.15 with Miner v2022.06.09.0

b. Pay 10 USD - the computecoin activation fee, COTX will collect, then pay computecoin. This is an one-time charge.

c. COTX's partner bonding pool will help the customer to finish stake and enable the mining, so the bonding pool will take a share of your mining reward. Mining reward split rate:  Hotspot Owner: Bonding Pool : = 60% : 40% 

d. Hotspot owner should keep your X3 hotspot online; if it is offline for more than 3 consecutive days, CCN reward will be deducted automatically. It is all because CCN needs the mining node could provide stable compute power.

e. Agree on the the COTX FlexiMining Terms of Service.

f. Agree on the the Computecoin Terms of Service.


Enable FlexiMining CCN

Login to your COTX IOT Cloud:  COTX Hotspot Cloud Service , enter your walletspace, click the arrow into your Hotspot dashboard; or click "Hotspot" menu in the left menu directly enter your Hotspot dashboard; 

In the Hotspot Tab, click the shopping cart icon right next the CCN:

Check your payment information in checkout page;

Please be noted: the ONE TIME charge 10USD is for CCN enablement, not charged by COTX; and this is non-refundable.

Recurring payment is for FlexiMining monthly fee, you will be charged every 3 month.



In put your discount code if you have one:



Once payment done, close this page, wait a while (1-2 mins), back to the COTX Hotspot Cloud Service.  Back to the Hotspot Tab: CCN is ready to be installed:

Click CCN, then start to install CCN mining app in COTX hotspot:


If time out, try again to click INSTALL; When installation success, click NEXT:

In STEP 2, click INITIALIZATION:

CLICK Next, when initialization is successful:





Input Ale wallet address, then COMPLETE the installation process:


Reference:  >Create your Ale Wallet

Please be noted: once you input your Ale wallet address for CCN mining app, you can not change it anymore.

Input Ale wallet address, then COMPLETE the installation process:

Then COTX will notify bonding pool to manually enable the backend system, normally it would take several days.


End user please use this website to check your CCN reward: https://bonding-pool.computecoin.network/

Add your Ale wallet address at first:

Then, In the "My Staking" tab to check your CCN reward:


If you have questions: Please contact services@cotxnetworks.com

or reach us by COTX discord https://discord.gg/cotxnetworks    channel #cotx-fleximining 

CCN Reference

https://computecoin-network.gitbook.io/computecoin/computecoin/about-computecoin-ccn



FlexiMining - EarnApp (in Beta test stage)


Please read through COTX FlexiMining Terms of Service and agree the terms before you take any action.


About EarnApp

https://earnapp.com/

EarnApp for users is a PC/Mac app that allows users to generate money from their PC by sharing their bandwidth. EarnApp for developers is an SDK that developers can add to their apps in order to monetize their app. Both use the same engine and operate in a similar way. 

EarnApp FAQ

Prerequisites for run EarnApp in your COTX Hotspot

a. Your COTX X3 version upgraded to the latest version

b. Stable broadband, unlimited capacity and time;  

c. Hotspot owner should keep your X3 hotspot online;

d. Agree on the the COTX FlexiMining Terms of Service.

e. Agree on the EarnApp Terms of Service.

f.  The customer takes the full responsibility to use and provide EarnApp service in your country/region.



Enable FlexiMining EarnApp

If for beta test:

Login to your COTX IOT Cloud test environment:  COTX Hotspot Cloud Service- Test Environment,


If for production:

Login to your COTX IOT Cloud:  COTX Hotspot Cloud Service


These two environments, are using the same login credentials.


Enter your walletspace, click the arrow into your Hotspot dashboard; or click "Hotspot" menu in the left menu directly enter your Hotspot dashboard; 

In the Hotspot Tab, click the shopping cart icon right next the EarnApp:

Check your order, this is a recurring order, you will be charged every 3 month, and FlexiMining service fee is unrefundable.


Finish you payment:



Finish your payment and subscription of the FlexiMining service fee for EarnApp:


Finish payment, wait for several mins, back to COTX Hotspot Cloud Service, https://cotx-sg.io, in Hotspot dashboard, click EARNAPP start to install EarnApp into your COTX Hotspot:



Agree terms, start intallation:


Click EARNAPP here to finish the EarnApp account sign up.

Back to COTX Hotspot Cloud Service finish installation with your registered EarnApp username and password:


When installation finish, click the "Here" to add you hotspot into your EarnApp account, then when you open EarnApp cloud portal you will find you installed EarnApp on your COTX Hotspot:


EarnApp Reference

https://earnapp.com/faq/



FlexiMining - Storj (in Beta test stage)


Please read through COTX FlexiMining Terms of Service and agree the terms before you take any action.


About Storj

https://www.storj.io/

Prerequisites for run Storj in your COTX Hotspot

a. Your COTX X3 version upgraded to the latest version, latest than V1.3.23.

b. Stable broadband, unlimited capacity and time;  

c. Hotspot owner should keep your X3 hotspot online;

d. Agree on the the COTX FlexiMining Terms of Service.

e. Agree on the Storj Terms of Service.

f. The customer takes the full responsibility to use and provide Storj service in your country/region.

h. Make sure that the USB interface of the hotspot is connected to the SSD and the available hard disk capacity is > = 500G. It is recommended to buy at least 1T hard disk. Check Storj web site to confirm hard size you needed.

i. Set the disk format to EXT4

j. Hard disk requirements:

 - 2.5" and 3.5" hard disk; 3.5" hard disk need it's own external power source;

 - 2.5'' mechanical disk, SSD, NVME SSD or MSATA; 

 - highly suggest the customer get a high speed USB Hub with it's own power source;



Enable FlexiMining Storj

If for beta test:

Login to your COTX IOT Cloud test environment:  COTX Hotspot Cloud Service- Test Environment,


If for production:

Login to your COTX IOT Cloud:  COTX Hotspot Cloud Service


These two environments, are using the same login credentials.


Enter your walletspace, click the arrow into your Hotspot dashboard; or click "Hotspot" menu in the left menu directly enter your Hotspot dashboard; 

In the Hotspot Tab, click the shopping cart icon right next the Storj:


Check your order, this is a recurring order, you will be charged every 3 month, and FlexiMining service fee is unrefundable.


Finish you FlexiMining fee payment:


Finish your payment and subscription of the FlexiMining service fee for Stroj.


Finish payment, wait for several mins, back to COTX Hotspot Cloud Service, https://cotx-sg.io, in Hotspot dashboard, click STORJ start to install Storj into your COTX Hotspot; read through the terms, click  I Agree to the Above Terms:


Enter Storj related parameter information:

Check following instructions about how to get these parameters.


STORJ Username:Enter the username that has been registered and activated on the official STORJ website. If you do not have an account, register a new account. The process is as follows:

Log in to the official website of STORJ: https://www.storj.io/, and click "Start for Free".

Input the registration information and click "Sigh Up":


After registering successfully, return to the login screen, enter the  account information, and click Sign in:


Click the user to view the email address, which is Storj Username.


STORJ Port:  The port number used by STORJ;  lf the gateway is located in the LAN, configure the router to complete port mapping and ensure that the gateway be connected through STORJ Port of the public IP address. The configuration method can be referred to the following figure. For example, if STORJ port is set to 28967, the router configuration is as follows:


STORJ Wallet Enter the registered website address of STORJ Wallet; If not, create a new wallet to obtain the wallet address, as follows. Login Storj wallet website: https://v5.myetherwallet.com/create-wallet, click on the Create A New Wallet.


Select " By Keystore File" and set Password and click Next to generate the key File.


After generating the Keystore File, click " Download Keystore File" to Download the Keystore File to your local computer.



Click " Access My Wallet" and select " Software" to import the key file library you just downloaded and enter the Password you set when you created the key store file.


Click " Access Wallet" , copy " Address" and input to " STORJ Wallet" of Cloud Hotspot Service.


Noip Username: Enter the registered and activated Noip account; If not, register the account and activate it

Log in to https://www.noip.com/, enter user-defined Hostname, and click "Sign Up".


Enter the email address and password in the registration interface, and click " Free Sign Up" at the bottom. Note:  The Free version only  supports 30 days, and you need to buy a package if you need to  use it for a long time.

Enter the registered mailbox and activate it for the second verification. After verification, click Log in. Enter the NOIP email  account/ password to log in. After successful login, the account will be activated. The email address is noip Username.


Noip Password: The password you set when you registered your Noip account.

Noip Domain:  Click on My Services--> DNS Records to get the full Domain name.


Disk Size: Must be filled in at least 500G.

Auth Token: log on https://www.storj.io/ host-a-node.

Storj into https://www.storj.io/ host-a-node, input the username  email or noip username email address, perform man-machine confirmation.

Click Continue to generate Auth Token.


Enter the relevant Storj parameters and click "Install" to complete the installation.



Storj Reference

Storj Doc

Storj Node Support